Silk printing Pantone color ATA5577 elevator key card

Chip Parameters:

ATA5577 

is a contactless read/ write identification IC (IDIC) for applications in 125-kHz or 134-kHz frequency band. A single coil connected to the chip serves as the

IC’s power supply and bi-directional communication interface. The antenna and chip

together form a transponder, or tag.

The on-chip 363-bit EEPROM (11 blocks with 33 bits each) can be read and written

block-wise from a base station (reader).

Data is transmitted from the IDIC (uplink) using load modulation. This is achieved by

damping the RF field with a resistive load between the two terminals Coil 1 and Coil 2.

The IC receives and decodes serial base station commands (downlink) which are

encoded as 100% amplitude modulated (OOK) pulse-interval-encoded bit streams.

Full revision datasheet with enhanced data is available on request. Please contact

your local sales office.

Feature

* High Performance IDIC® (Extended Read/Write Distance)

* Contactless Power Supply

* Contactless Read/Write Data Transmission

* Radio Frequency fRF from 100 kHz to 150 kHz

* Basic Mode or Extended Mode

* Compatible with E5551/T5551, T5557, ATA5567

* Configurable for ISO/IEC 11784/785 Animal and Waste Standards Compatibility

* Total 363 Bits EEPROM Memory: 11 Blocks (32 Bits + 1 Lock Bit)

* On Chip Trimmed Capacitor

* High Q-antenna Tolerance Due to Build in Options

Application

Hotel Key Card

Access Control

Time Attendance
Animal Identification 
Waste management standard (BDE)
Programming to EM(Manchester) format or any other format customized

Available crafts:

Metallic silver/golden color

- Offset CYMK 4 colours
This is the most common method used in commercial printing.

The CMYK refers to the four inks used in the printing process: Cyan, Magenta, Yellow and Key (Black)

- Screen Printing
This method is used when the artworks only have limited colours and the accuracy is important.

We accept custom material and artwork/design order

Free design for you , we prefer you give us artwork file with either of below format
Coreldraw (.Cdr)
Adobe Illustrator (ai/.EPS/PDS)
Photoshop (PSD , 300dpi at lea